Search The Knowledge Base |
Browse By Category |
|
|||||
How do I update my Zebra printer firmware? | |||||
NOTE: The steps below are provided as a service to our customers and are not supported by NRG Software support. NRG is not responsible for any problems related to firmware updating.
Mac Upgrade NOTE: The Zebra printer must be connected directly to the Mac to update the
firmware. It cannot be connected to the network (e.g. cannot be
connected to a network print server, it must be directly connected via
USB). After you enter this
command in Terminal, you will see the printer power indicator light
blink and flash, and then it will do the calibration, then flash
again. This process takes about 10 minutes. Once complete, your printer
firmware is updated and you can delete the update file from the root of
your hard drive. NOTE: The Zebra printer must be connected directly to the PC to update the firmware. It cannot be connected to the network (e.g. cannot be connected to a network print server, it must be directly connected via USB or parallel port to the PC). 1) Go to Zebra.com and download the latest firmware file and ZDownloader software for the GK420D. Comments and issues related to Zebra printers should be directed to Zebra technical support at (877) 275-9327 |
Related Articles |
No Related Articles Were Found |
Attachments |
No Attachments Related to This Article |